Brick cladding

Marmoroc Nordic

Colour concrete blocks for new builds and rebuilding. A complete façade system, including with exterior façade insulation. Type approved by Sitac according to BBR, sections 6:532, 5:63, 5:631 and BKR
section 2:111 (Certificate No. 1356/70).

Product description
Façade blocks of white crushed marble, white cement and pigment, with a water repellent outer surface.
The blocks are hooked onto vertical profiles of galvanised and varnished steel plate (no sealing material or fixing devices required).
Individual blocks can be easily replaced if damaged.
Length: 300 and 600 mm.
Constructional height: 100 and 200 mm.
Thickness: 28 and 32 mm.
Space requirement: c. 50 mm including fitting profile and 20 mm air
Blocks with profiles weigh 42 – 48 kg/m2.
The blocks are coloured throughout, with smooth or slightly textured surface and are available in 20 standard colours. Other colours of surface-coloured blocks can be ordered from the NCS colour range.
The blocks have about 10 mm horizontal and 5 –20 mm vertical joint marking.
Façade patterns can easily be built up using different formats and colours, with square patterns or displaced vertical joints.


Incombustible material.

Made of crushed marble, cement and water.

Planning guidelines
The steel profiles are screwed directly to the substrate. A 20 mm air space is created between wall and brick.
A complete insulation system is available for exterior façade insulation (see separate report on the page on Marmoroc Support System).
A façade system for buildings up to 100 metres.
Assembly instructions and detail drawings for termination to doors, windows, corners, foundation, eaves etc. can be ordered.